LS-160 Series
Multi-function Sensor Hub and Switch for LoRaWAN™

Description
LS-160 series is a multi-function Sensor Hub with features to support environmental sensors such as Temperature, Humidity, Atmospheric Pressure, Water Leakage and Luminosity.
This product comes with water-proof and sturdy design which makes it suitable for outdoor use cases. Besides, LS-160 can be easily installed and requires very low maintenance.

LS-160S with additional junction box has the ability to connect most RS-485 type sensors and gives you high flexibility to implement all kinds of applications.

LS-160W has the ability to control GPIO and becomes a LoRaWAN switch if combined with a relay.

LS-160R and LS-160T are power-efficient devices with internal battery for long time use. Once connected to our high performance water sensor rope or temperature/humidity probe, they are able to detect water leakage and temperature/humidity respectively.

Features

Radio:

• LoRa^® Technology

LS-160S for External sensor integrated:

• Outdoor Temperature & Humidity Sensor
• Indoor Temperature & Humidity Sensor
• Wind Speed and Direction Sensor
• Water Level Sensor

LS-160W:

• LED Warning Light

LS-160R:

• Water Leak Sensor Rope

LS-160T:

• Temperature Sensor Probe

Specifications

LoRa® Module	GlobalSat LM-533PH LoRaWAN™ Module
Frequency	863 - 870 MHz (EU) 902 - 928 MHz (US) 920 - 928 MHz (ROA)
LoRa® Antenna (Only alternative)	Internal LoRa® Antenna Option: External RPSMA Connector
External Flash	2M Bytes (Reserved for log)
Button	Power key
Waterproof Connector	Yes
Display	No
Protocol Available	LS-160S: RS-485*1 (Default) LS-160W: GPIO*1 (Default) LS-160R: GPIO *1 (Default) LS-160T: GPIO*1
Power Output	12V, 3A
Sound Effect	Buzzer (Film, 75 dB @ 1M)
LED Indicator	Power LED : Red (Low battery : blinking 0.5s) LoRa® Transmitting LED：Blue
ON Board Sensor	No
External Sensor Available	LS-160S: Outdoor Temperature & Humidity Sensor (RS-485) Indoor Temperature & Humidity Sensor (RS-485) Wind Speed & Direction Sensor (RS-485) Water Level Sensor (RS-485) LS-160W: LED Warning Light (GPIO) LS-160R: Water Sensor Rope (GPIO) LS-160T: Temperature Sensor Probe (GPIO)
Battery	LS-160S/ LS-160W: NA LS-160R/ LS-160T: 14250, 3.6V, 1/2-AA size inside (Default)
Transmission Distance	1 KM ~ 10 KM (980 bps)
Receiving Sensitivity	-131 dBm @ SF12/ 500 kHz
Operating Temperature	Operation: -20℃ ~ 60℃ Storage: -40℃ ~ 80℃
Humidity	5% to 95% Non-condensing
Waterproof	IPX7
Certification	FCC, CE, NCC, TELEC(Antenna listing), IC(Reserved)
Dimension	(L)107.5mm x (W)38.7mm x (H)22.8mm
Weight	50g
Accessories	LS-160S: QSG Waterproof Junction Box Main Unit to Junction Box Cable Junction Box to Sensor Cable Option: Indoor Temperature & Humidity Sensor (-20℃ ~ 60℃, 0~100%RH) Option: Outdoor Temperature & Humidity Sensor (0℃ ~ 60℃, 0~100%RH) Option: Wind Speed Sensor (200g, IP65, φ42~φ52) Option: Continuous Fluid Level Sensor (200mm/ 315mm/ 618mm/ 823mm) Option : Sensor Programmable Cable (upgrade/debug) Option : Customize Cable Package (TBC) LS-160W: QSG Option: LED Warning Light Option : Sensor Programmable Cable (upgrade/debug) Option : Customize Cable Package (TBC) LS-160R: QSG Option: Water Sensor Rope (1.5M/ 3M) Option : Sensor Programmable Cable (upgrade/debug) Option : Customize Cable Package (TBC) Option : 3.6V, 1/2-AA Battery LS-160T: QSG Option: Temperature Sensor Probe (GPIO) Option : Sensor Programmable Cable (upgrade/debug) Option : Customize Cable Package (TBC) Option : 3.6V, 1/2-AA Battery

Accessories

• Waterproof Junction Box (For LS-160S/ LS-160W)
• Main Unit to Junction Box Cable (For LS-160S/ LS-160W)
• Junction Box to Sensor Cable (LS-160S Only)
• Indoor Temp. & Humi. Sensor (LS-160S Option)
• Wind Speed Sensor
  (LS-160S Option)
• Outdoor Temp. & Humi. Sensor (LS-160S Option)
• Fluid Level Sensor
  (LS-160S Option)
• LED Warning Light
  (LS-160W Only)
• Water Sensor Rope
  (LS-160R Option)
• Temp. Sensor Probe
  (LS-160T Option)
• 3.6V, 1/2-AA Battery (LS-160R/ LS-160T Option)
• Sensor Programmable Cable (Option)